Hello, we have an IPSEC VPN set up on a router for remote access. This works very well, mostly. We have also a few static PAT entries for allowing access to a web server etc from the outside. We deny NATting from the private IP range to the VPN client range and this works except for the entries that also have the PAT configurations.
So, for instance, we have web server 10.0.0.1 and a PAT forwarding port 10.0.0.1:80 to the WAN IP port 80. If a VPN client tries to connect to 10.0.0.1:80, the syn-ack packet comes back tot he VPN client from the router's WAN IP! If the VPN client connects to RDP server 10.0.0.2:3389, it works fine as this server doesn't have a static PAT entry.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...