Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN Client behind a pix

I have a VPN client configured behind a pix connecting to a remote 3005 concentrator. The tunnel is established fine but I do not receive any traffic over the tunnel. The clients work fine at any other location except this one with the pix.

3 REPLIES
Silver

Re: VPN Client behind a pix

Hi Ryan,

Are you using Transparent Tunneling on the vpn client, If so what protocol, udp or tcp

john

New Member

Re: VPN Client behind a pix

John,

I am using Transport Tunneling, udp.

Best Regards,

Ryan

Silver

Re: VPN Client behind a pix

Hi Ryan,

I am guessing the vpn concentrator is not setup to check for connections that require udp encapsulation.

Try using Transport Tunneling, tcp port 10000 (check with concentrator admin what port they are using but usually it's 10000)

Alternatively you can enable "IPSec over NAT-T" on the vpn concentrator. This option is found under Tunneling and security ---> ipsec ---> nat transparency

regards

John

96
Views
0
Helpful
3
Replies