I have an established VPN connection to a remote PIX 525 from my home office. This is not an IPSec connection. On my side I have a PIX 501 currently running 6.2(2). After establishing a connection I cannot access the remote or my own local LAN network other that to ping the IP addresses assigned to me by the remote firewall or my local network. My PIX 501 appears to be blocking the traffic as I can ping outside addresses from the firewall itself. QUESTION: Is there anything that I need to do on my PIX 501 firewall in order for this to work? I am using the Cisco VPN client Ver 4..8.002.0010 running on Windows XP Pro.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...