I have a vpn setup. I can vpn in from either the outside (internet) or from inside my network. Once I do that I can no longer ping or remote into the server I have setup on the 192.168.1.0/24 subnet. I can ping from the 192.168.1.0 subnet to any other subnet but I cannot ping from the vpn subnet to any other subnet. I know that I have some permits on Outside-IN and Inside-IN, this is only to make it easier to troubleshoot. Thank you in advance.
The VPN subnet is 192.168.2.0
The Server subnet is 192.168.1.0
the Internal client subnet is 10.0.0.0 /24
Here is the config and the packet-tracer output
ASA Version 8.2(5)
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
switchport access vlan 2
ip address 192.168.1.1 255.255.255.0
ip address dhcp setroute
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network Axon
network-object host 192.168.1.6
object-group network VPN-Clients
network-object 192.168.2.0 255.255.255.0
object-group service HTTP-HTTPS tcp
port-object eq www
port-object eq https
object-group service RDP tcp
port-object eq 3389
access-list Outside-IN extended permit ip any any
access-list Inside-IN extended permit ip any any
access-list Axon-NAT extended permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPNPool 192.168.2.2-192.168.2.10 mask 255.255.255.0
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...