Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Concentrator Load Balancing

I have 3020 VPN Concentrator. Everything is running fine. Now management I wanted to add second VPN 3020 Concentrator. Of course i will configure the VRRP and three global Ip addresses is required for it. Two for Concentrators and one for VRRP IP. Now I wanted to know, How the configuration will replicate. After configuring VRRP, My currently concentrator will become master. If I will Configure New VPN Conncection. Will i configure on Master concentrator and I suppose to configure Both master and Slave. Kindly guide me and help me out.


Re: VPN Concentrator Load Balancing

This feature is called Failover. You don't have an option to autosynchronize the configuration. But you can copy the configuration from one of the concentrator and apply it to the other avoiding manual configuration.

New Member

Re: VPN Concentrator Load Balancing

Thanks for the reply,

can you tell me the how the network topology will be.

Currently concentrator public is connected with internet and private is connected with LAn.

How the second concentrator will connect into the network.

How i will make the VPN Configuration, bcz remote end will connect on Virtual Ip address.

how i will configure my primary and secondary vpn concentrator. shall i make the indiviual configuration for remote side as I am doing right now with standalone VPN concentrator.

Right now my local data base server route points towards Primary concentrator. When I will configure the VRRP, on which Lan IP database server will send the traffic.

Kindly if you are running the same step, please provide me with the guidline.