Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VPN configuration on cisco 1941

Hi all,

I bought my first device of Cisco, and now I want to create VPN from my router to another Cisco device.

I found manual how to do it: https://supportforums.cisco.com/thread/2012359?tstart=0

But in my router I do not have "isakmp", I have only 3 choices:

my-router(config)#crypto ?

  ca   Certification authority

  key  Long term key operations

  pki  Public Key components

my-router(config)#crypto

Can you give my some documentation how to do it?

my-router#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)

Cisco CISCO1941/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID FCZ141190AK
2 Gigabit Ethernet interfaces

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: VPN configuration on cisco 1941

Hi,

Cisco IOS Software Licensing and Packaging

A single Cisco IOS Universal image encompassing all functions is delivered with the platforms. You can enable advanced features by activating a software license on the Universal image. In previous generations of access routers, these feature sets required you to download a new software image. Technology packages and feature licenses, enabled through the Cisco software licensing infrastructure, simplify software delivery and decrease the operational costs of deploying new features.
Four major technology licenses are available on the Cisco 1941 Series Integrated Services Routers; you can activate the licenses through the Cisco software activation process identified at http://www.cisco.com/go/sa.

• IP Base: This technology package is available as default.

• Data

• Security (SEC) or Security with No Payload Encryption (SEC-NPE)

For additional information and details about Cisco IOS Software licensing and packaging on Cisco 1941 Series Integrated Services Routers, please visit http://www.cisco.com/go/1941.
It seems that the router is using the universal image but does not have the security feature set.
Federico.
2 REPLIES
Community Member

Re: VPN configuration on cisco 1941

Hello,

as I understand there are problems with licence.

Now I'm waiting answer from cisco seller.

Re: VPN configuration on cisco 1941

Hi,

Cisco IOS Software Licensing and Packaging

A single Cisco IOS Universal image encompassing all functions is delivered with the platforms. You can enable advanced features by activating a software license on the Universal image. In previous generations of access routers, these feature sets required you to download a new software image. Technology packages and feature licenses, enabled through the Cisco software licensing infrastructure, simplify software delivery and decrease the operational costs of deploying new features.
Four major technology licenses are available on the Cisco 1941 Series Integrated Services Routers; you can activate the licenses through the Cisco software activation process identified at http://www.cisco.com/go/sa.

• IP Base: This technology package is available as default.

• Data

• Security (SEC) or Security with No Payload Encryption (SEC-NPE)

For additional information and details about Cisco IOS Software licensing and packaging on Cisco 1941 Series Integrated Services Routers, please visit http://www.cisco.com/go/1941.
It seems that the router is using the universal image but does not have the security feature set.
Federico.
1210
Views
0
Helpful
2
Replies
CreatePlease to create content