I would like to configure a VPN connection to Cisco 2811 Security IOS to a PIX 515e in a lab enviroment. I would lie to use a crossoer cable between the interfaces. i do have 2 extra router and 2 switch if there needed. I'm trying to get a bette understanding of the VPN security.
Personally i would use at least one of the spare routers to represent the cloud. This will actually simulate a more real world environment that just using a crossover cable and there will always be routing involved in this type of scenario in the real world.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...