I have a PIX 501 that is connecting to our main ASA 5510. The 5510 is the hub and the 501 is the spoke in our VPN setup. All other spokes in our network are working fine. One of our sites is having a problem. The PIX will load up, and work for just a few seconds, then will cease to connect. The PIX is still powered on and we are able to telnet in, show int on E0 lists up and up. We are not however able to SSH into the PIX, but we CAN ping the external interface. We tried reloading, which works for a few seconds, then fails. We also did a clear cry ipsec sa command and that does not fix it. We did some logging and it looks like it tries to build the VPN, then tears it down, then repeats the process over and over. We also removed and re-added the isakmp key to no avail. Any help is appreciated
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...