Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN ERROR: %CRYPTO-4-RECVD_PKT_NOT_IPSEC:

Hi All ,

I am running remote VPN .

I am getting the below error messages . Could anyone please help me in resolving the same .

Jun  4 12:20:59.510 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.111.200.255, src_addr= 10.111.200.11, prot= 17

Jun  4 12:23:56.196 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.111.200.255, src_addr= 10.111.200.9, prot= 17

Jun  4 12:25:53.255 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.111.200.255, src_addr= 10.111.200.9, prot= 17

Jun  4 12:27:29.518 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.111.200.255, src_addr= 10.111.200.156, prot= 17

Jun  4 12:28:29.611 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.111.200.255, src_addr= 10.111.200.135, prot= 17

Jun  4 12:29:29.737 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.111.200.255, src_addr= 10.111.200.135, prot= 17

Jun  4 12:31:53.241 UTC: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.111.200.255, src_addr= 10.111.200.9, prot= 17

Regards

Angus

3 REPLIES
New Member

VPN ERROR: %CRYPTO-4-RECVD_PKT_NOT_IPSEC:

It means the packets are not encrypted, you should check your ip access lists to hit on your interesting traffic

New Member

VPN ERROR: %CRYPTO-4-RECVD_PKT_NOT_IPSEC:

Or, probably, you have forgotten to apply crypto map to an interface

New Member

Re: VPN ERROR: %CRYPTO-4-RECVD_PKT_NOT_IPSEC:

Hi ,

I have applied the crypto map on the interface

I am attaching the config file please tell me if anything wrong .

Regards

Angus

3082
Views
0
Helpful
3
Replies