I'm having trouble with the home side of a work/home connection. We had a PC crash a month ago, and our DSL modem was reinitialized. I have the PC reloaded now and am having trouble making the VPN connection.
I hit connect. I enter username and password. It attempts to secure the connection but after about 20-30 seconds it quits. I can't get past this point.
Here's a description of my system.
Windows XP with all Microsoft updates.
McAfee Total Protection
Cisco VPN Client 4.8.00.0440
AT&T DSL, logging in via PPPOE
Wireless router (currently not connected while troubleshooting, PC is connected directly to DSL)
It feels like the issue is either a DSL setting or a McAfee Firewall setting.
Created this log during the last attempt, hoping this will help.
Cisco Systems VPN Client Version 4.8.00.0440 Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 5.1.2600 Service Pack 3 Config file directory: C:\Program Files\Cisco Systems\VPN Client
1 10:53:59.015 08/08/10 Sev=Warning/3 CVPND/0xA340000D The virtual adapter was not recognized by the operating system.
2 10:53:59.015 08/08/10 Sev=Warning/2 CM/0xE310000A The virtual adapter failed to enable
3 10:53:59.203 08/08/10 Sev=Warning/2 IKE/0xE3000099 Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...