i have installed and connected the two laptops with cisco vpn clients /IPsec/ to the asa5505, the laptops get ip 10.10.110.x from the asa ip pool, and i have ping between laptop1 and the asa and laptop2 and the asa, but i don't have ping between the two laptops . I have created the Ipsec with split tunneling group2 . What am i doing wrong? Thanks!
If the clients are connecting to the same tunnel-group and you would like to allow communication within each other, you will need to configure thesame-security-traffic permit intra-interfacecommand on the ASA.This command lets traffic enter and exit the same interface, which is normally not allowed. This feature is useful for VPN traffic that enters an interface, but is then routed out the same interface. The VPN traffic might be unencrypted in this case, or it might be reencrypted for another VPN connection.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...