Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VPN lab help between Pix and router

Hi,

I'm trying to create a VPN in my lab setup.

I have a Cisco Pix 515 and a Cisco 2621 router.

I don't have a crossover cable yet, so the outside of the firewall is plugged into a hub and the outside interface FE 0/0 on the router is plugged into the hub too.

The router can ping the outside IP of the Pix.

I must be missing something as I have added the VPN commands to the router and Pix and enabled debugging on the crypto ISAKMP but I see nothing.

The Pix LAN is 192.168.200.0/24

The Router LAN is 10.10.10.0/24

Pix Outside is 213.212.82.5

Router Outside is 213.212.82.6

Using AES-256 SHA, DH Group 5

Hopefully you can see whatthe issue is, I am almost going to eraze both configs and start again.

1 REPLY
Community Member

Re: VPN lab help between Pix and router

Whoops here are the configs!

257
Views
0
Helpful
1
Replies
CreatePlease to create content