Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN log in , but do not access to the host on specified port

I have configure e ipsec remote access VPN

VPN connect receieve ip from the pool i have cofigured everything is ok

I use asa as firewall and ACS for users

as you can see log from asa :

access-list #acsacl line 1 extended permit tcp 192.168.1.0 255.255.255.0 host 10.220.220.5 eq 1988 (hitcnt=0)

access-list #acsacl line 2 extended deny ip any any (hitcnt=59)

line1 does not have any hitcnt , dircetly the request goes on line 2 , the acl above is configured on ACS , so i donnt access host 10.220.220.5 on port 1988

any idea ?

1 REPLY

Re: VPN log in , but do not access to the host on specified port

Hi,

If you added the "deny ip any any" please remove it, there is an implicit deny rule by definition.

On the other hand, what is this ACL for? split-tunneling or VPN filter? Is the 192.168.1.0/24 network the VPN pool?

Thanks.

272
Views
0
Helpful
1
Replies
CreatePlease login to create content