Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vpn monitoring

Gurus,

Do we have a way to monitor site to site or SSL VPN ( anyconnect) for tracking users logins, things conducted by user during the session & any further checks that may need to be done.


Appreciate any help on this.

Thanks!

1 REPLY
New Member

Re: vpn monitoring

Hi Thomas,

You need to enable SYSLOG following messages on the ASA:

722007

Error Message %ASA-3-722007: Group group User user-name IP IP_address SVC Message:

type-num/ERROR: message

Explanation This is a message from the SSL VPN client (SVC) .

type-num— A number from 0 to 31 indicating a message type. Message types are as follows:

0—Normal.

16—Logout.

17—Closed due to error.

18—Closed due to rekey.

1-15, 19-31—Reserved and unused.

message—A text message from the SVC.

722037

Error Message %ASA-5-722037: Group group User user-name IP IP_address SVC closing

connection: reason.

Explanation An SSL VPN client (SVC) connection was terminated for the given reason.

reason—The reason the SVC connection was terminated.

113019

Error Message %PIX|ASA-4-113019: Group = group, Username = user, IP = peer_address,

Session disconnected. Session Type: type, Duration: duration, Bytes xmt:

count, Bytes rcv: count, Reason: reason

Explanation This is an information message.

group—group name

user—username

peer_address—peer address

type—session type (for example, IPSec/UDP)

duration—connect duration

count—number of bytes

reason—disconnect reason

Recommended Action None.

Thanks,

Pradhuman

347
Views
0
Helpful
1
Replies