Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VPN Newbie Which Client?

What I have:

-ASA 5505 basic license  8.43 and ADSM, 

-need for one external user to have full access to the inside network.  Users home IP is dynamic and travels a lot as well (windows OS)

-disk from IT containing the following bit and pieces

( anyconnect-EnableFIPs-win-3.0.5080 / anyconnect macosx-i386-2.5.3055-k9.pkg / zipfile named anyconnect-win-vpnapi-2.5.3055 / vpnclient-win-msi-5.0.07.0410-k9 / asa843-k8 / asdm-647 / c3750-ipbasek9-mz.122-55.SE5 / c3750-ipservicek9-mz.122-55.SE5 )

( the zip file created folder with subfolders: examples, include, lib and a bunch of files doxygen, apis etc...... )

Questions:

(1) What are my options given the above for the external user??

(2) Currently I administer ASA via adsm https or ssh.  I would like to administer via an Ipsec to Ipsec tunnel from a zyxel USG 100.

-Is it possible to administer the ASA via a VPN tunnel to the router (not to any specific inside or dmz interface)?

-If so, do I tunnel and use https and ssh through the tunnel?

6 REPLIES

VPN Newbie Which Client?

Alex,

This question at this time is academic - do you have a license for VPN users???? How many VPN Peers does your current license contain??

To answer your other questions:-

1) This is based on your license

2)

     a) Yes

     b) Yes

HTH>

New Member

VPN Newbie Which Client?

Yes I have a license which has something like two SSL VPN users and 10 ipsec users. (basic).  i have attached a jpeg fromthe license page for detail............

VPN Newbie Which Client?

Vpnclient-win & AnyConnect-win & client less spl VPN.

hth

New Member

VPN Newbie Which Client?

By anyconnect-win... does this include the variation where you need to download the .pkg file and the router pushes it to the client.  ???

For the ipsec to ipsec connection from me the admin to the asa itself (and not to the inside lan),  what do I put for interfaces or local stuff on the asa side (as I am not identifying a subnet I want to access ??)

VPN Newbie Which Client?

The .pkg will install on the remote end computer.  With the "win" in the name - the remote end must be a Windows OS.

Read the below link - it has configuration examples that answer all your questions.

http://www.cisco.com/en/US/customer/products/ps6120/prod_configuration_examples_list.html

HTH>

New Member

VPN Newbie Which Client?

hmm that link doesnt open for me?

426
Views
0
Helpful
6
Replies
CreatePlease to create content