VPN not connecting to Linksys 10/100 4-port VPN Router with ASA 5505
We're trying to get a new ASA 5505 put in place on our network after the untimely demise of our 1841 router. One of the functions of the router that we need to get back up and running is a pair of VPNs to employees that we have working from off-site. These are site-to-site VPNs.
They worked with the 1841 in place, so I know that the other end works. I'm just having trouble configuring the ASA to match. I've been through the wizard in ASDM a couple of times, but have yet to have any luck getting it to connect.
Attached are config files for the 1841 (with both VPNs) and the 5505 (with only 1 VPN in place). Can anyone help me with what I may be missing in order to get this working?
One note - I am having some trouble with my NAT configurations (another post pending), but I think they are close enough that I hope it's not interfering with the VPNs.
If I can get one running, the other has a nearly identical set up, so I should be able to get the second pretty easily.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...