Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN performance NPE-G2 VAM2+ 7206vxr

I have got headquarter which connected with 150 branchs.My intend is bought the two redundancy routers of VPN which will be serve 150 branchs(OSPFoverGREoverIPSEC and data traffic about 40Mbps esp-aes+sha)

Is this router (7206vxr,NPE-G2,VAM2+,1GB DRAM)enough??

How is performance for this router with the same configuration or similar.

3 REPLIES

Re: VPN performance NPE-G2 VAM2+ 7206vxr

That router will have no problem encrypting/decrypting 40MBs of traffic. According to the datasheet (http://cisco.com/en/US/products/hw/routers/ps341/prod_bulletin0900aecd80205255.html) it can do 280Mbs of traffic and 5000 tunnels.

HTH and please rate.

New Member

Re: VPN performance NPE-G2 VAM2+ 7206vxr

I looked this link many time ago but there is performance with only IPSec tunnels without OSPF and tunnels GRE. If I will use OSPF and GRE to about 150 branchs(in the future about 300)then performance will be drop sharply.How many decrease performance if I will add one branch with 200kbps

average traffic and OSPFoverGREoverIPSec. It will not be 0,2Mbps(from 280Mbps).Average IPSec traffic on the link currently is about 25 Mbps.

Someone was write that encryt card VAM2+ with GREoverIPSec and the multicast dynamic routing protocol in the productive environment have performance maximum 50Mbps but without GRE 100Mbps then CPU utilize quickly increase up to 95%.I don't know is this true?I must buy device which it will be perform up to 40-50Mbps in the future(OSPFoverGREoverIPSec).

Re: VPN performance NPE-G2 VAM2+ 7206vxr

If you have questions about performance and adding protocols and their impact, the best resource is your local Cisco SE.

497
Views
0
Helpful
3
Replies
CreatePlease to create content