12-16-2005 03:01 PM
I have a pix515 configured with a working remote access vpn which is in production. I also have a pix 501 which i used to setup a site to site vpn with the pix515. I got the site to site vpn to work. Now, when i tried to use the remote access vpn i keep getting error, " IPSEC(validate_proposal): peer address 20.18.172.26 not found." That's that public address of the pix 501.I removed all the commands which i entered to setup the site to site vpn or at least i thought i did. Now, i keep getting, invalid local address. Can someone please help me because this is a production pix.
Thanks in advance
12-19-2005 11:54 AM
It's working now. I had removed this command, "crypto map mapname interface outside." I added it back and it's fine now.
12-21-2005 02:39 PM
the crypto map command needs to be re-applied everytime a change with the crypto map has been made.
in other words, the new crypto map settings will not be effective until the re-apply happens.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide