Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Vpn problem

I have a pix515 configured with a working remote access vpn which is in production. I also have a pix 501 which i used to setup a site to site vpn with the pix515. I got the site to site vpn to work. Now, when i tried to use the remote access vpn i keep getting error, " IPSEC(validate_proposal): peer address 20.18.172.26 not found." That's that public address of the pix 501.I removed all the commands which i entered to setup the site to site vpn or at least i thought i did. Now, i keep getting, invalid local address. Can someone please help me because this is a production pix.

Thanks in advance

2 REPLIES
Community Member

Re: Vpn problem

It's working now. I had removed this command, "crypto map mapname interface outside." I added it back and it's fine now.

Gold

Re: Vpn problem

the crypto map command needs to be re-applied everytime a change with the crypto map has been made.

in other words, the new crypto map settings will not be effective until the re-apply happens.

131
Views
0
Helpful
2
Replies
CreatePlease to create content