Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Remote Access on ASA5550

Hello Everyone,

Can someone show me how to create a VPN remote access client on a ASA5550.

Client will be using the CISCO VPN client.

Thanks

Alfred

1 REPLY
Cisco Employee

Re: VPN Remote Access on ASA5550

here you go

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/vpnrmote.html

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml#cli

you might need one more thing if you want split tunneling you can us ethe following commands under group-policy

for eg in the above g

group-policy hillvalleyvpn                 attributes

  split-tunnel-policy tunnelspecified

  split-tunnel-access-list value split    -> please verify the syntax not sure wht it is after split-tunnel-xxx vlaue split

whr you access-list split will be

permit internal network to remote vpn pool

and make sure you exemt this traffic from natting by specifying this traffoic in nat 0 acl

146
Views
0
Helpful
1
Replies