Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Server under Static NAT. Any advices?

Hi there,

Is it possible to setup a VPN server in DMZ under a static NAT translation? I have 2911 as an edge router, another 2951 as a firewall with four zones - inside1, inside2, outside, dmz. All IP addressing between edge and firewall is private. The web and mail servers are working in DMZ under static NAT. The question is - can I also setup VPN server in DMZ under the static NAT? The clients establishing VPN tunnels will work with DMZ servers (other servers) only. Thanks!

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: VPN Server under Static NAT. Any advices?

Yes, that can be done. For IPSec-VPNs, just make sure that NAT-Traversal is not disabled.

Sent from Cisco Technical Support iPad App


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
3 REPLIES
Silver

VPN Server under Static NAT. Any advices?

We featured your question on the Cisco Support Community Facebook page. Check out some of the responses here: http://www.facebook.com/CiscoSupportCommunity/posts/269198139851698

---

Posted by WebUser Cisco NetPro from Cisco Support Community App

VIP Purple

Re: VPN Server under Static NAT. Any advices?

Yes, that can be done. For IPSec-VPNs, just make sure that NAT-Traversal is not disabled.

Sent from Cisco Technical Support iPad App


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
New Member

Re: VPN Server under Static NAT. Any advices?

Thanks a lot for the answers!

406
Views
0
Helpful
3
Replies
CreatePlease login to create content