Can't seem to get a good answer to this one so I'll ask here - can anyone help me with a throughput issue? We are running a ASA5510 at our main site, and when we connect with the Cisco VPN client (v5), copying files from a remote site to the main site (say, via a laptop running the client), is less than 1mb transfer. The public connection at the main site is 35 meg symmetrical, and the connection at the home site is 50 down 12 up. Connection is using IPSEC/UDP transport. Can anyone point me in the right direction to see why we are getting ~768k transfer speeds? Shouldn't they be a bit faster?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...