First of all there can be only one crypto map applied per interface. So you have to use the existing crypto map (with the same name) only the priority number would be different.
Let's say priority number 65535 is used for remote access VPN so you have to use any number lower than this value for a site to site VPN.
Secondly, the access-list 150 should be called in the match address statement , you can not/ should not use the same ACL for nonat as well as the crypto map. Its not recommended. As the nonat ACL remains the same for all Site to site and remote access VPN tunnels but the crypto ACL is different and unique for each site to site tunnel.
I guess since they are talking about only one connection in the doc, its ok for that scenario, but will not work in your case.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...