We have Cisco 1841 peered with a Cisco ASA 5520 for a VPN tunnel. The 1841 is acting as the PPOE client and the DSL router is in bridge mode. We have an issue with the crypto map not staying applied to the dialer interface after the router is power cycled. The startup config shows the crypto map applied. Has anybody ever seen this issue before and the workaround?
RUNNING THIS IOS:
Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(25), R
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...