Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN tunnel problem

Hello,

Our vpn to a client is not working. This error message was log in our syslog server. Thanks

02-04-2007 22:59:51 Local0.Error 172.22.14.254 Feb 04 2007 13:54:45: %PIX-3-305005: No translation group found for udp src inside:172.22.212.217/500 dst outside:63.172.xx.xxx/500

3 REPLIES

Re: VPN tunnel problem

Hi,

This is a NAT problem.

You need to make sure you have NAT 0 in place ro traffic between vpn pool and local LAN (nat 0 (inside) acl NAT0), and NAT/PAT from the vpn pool to external public IPs (nat (inside), global (outside)).

Please rate if this helped.

Regards,

Daniel

New Member

Re: VPN tunnel problem

This is how our network is layout.

CISCO 1760>LAN>PIX515 INTERNET > Eclipse SUPPORT software vendor.

This cisco 1760 router has only one interface. This was only for support to get in to our network. I already have the nat (inside) 0 use for the remote VPN user. Is it ok to use nat (inside) 1 for this router? I am new to this. Thanks in advance.

New Member

Re: VPN tunnel problem

Hello,

I added a nat (inside) 10 0.0.0.0 0.0.0.0 0 0

now I am getting a different error. something no route to 172.22.14.10 from 65.124.xxx.xxx.

128
Views
0
Helpful
3
Replies
CreatePlease login to create content