I have 2 RV042 routers, one is version 1 and the other is Version 3 and both have up to date firmware loaded. Both ISPs are cable, one is Comcast and the other is Mediacom. I have set both MTUs to 1500 and set the upload download speeds in Bandwidth Management. Speedtest.net shows speeds at office # 1 of 30/5 and office # 2 is 10/2. As far as I can tell, connections between offices have never dropped but my transfer speed seems to be a little slow. I usually see transfer speeds of 150-200 KBps. I am assuming that it is correct as KB instead of Kb because that is what various programs show as the speed. Is there anyway to speed this up?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...