Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

vpn tunnel with multiple subnets PIX<->Secuway

i have a vpn tunnel carrying multiple subnets, peering to some korean brand firewall. problem is when they tried to initiate the tunnel i always get this log.

The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as 10.172.16.48, its source as 192.168.151.154, and its protocol as 1. The SA specifies its local proxy as 10.10.30.0/255.255.255.0/0/0 and its remote_proxy as 192.168.155.1/255.255.255.255/0/0.

but when i on my end when i tried to initiate the tunnel it works. we've compared both configs and all the same. any ideas guys???

  • VPN
1 REPLY
Bronze

Re: vpn tunnel with multiple subnets PIX<->Secuway

it looks like you did not have matching isakmp policies

Try this link:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtml

224
Views
0
Helpful
1
Replies