Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN Tunneling, Routing

Hi there,

we have got the following problem:

One of our customers is connected via VPN-Software-Client. Our peer is a concentrator. We are using private IPs in the following range 172.28.0.0 to 172.32.255.255.

The customer is using IPs 172.16.0.0/13.

When the customer is using the tunnel a connection to a host 172.16.x.x in our net is possible. A connection to a host 172.32.x.x is not possible.

A ping to 172.16.x.x is shown in the logfile of my firewall (where all packages have to travell through). A ping to 172.32.x.x does not reache the firewall.

Thanks in advance.

1 REPLY
Anonymous
N/A

Re: VPN Tunneling, Routing

Removed the IP Audit lines from the PIX configuration.

Apply the following command

access-list web_access line 1 permit icmp any any

access-list in_to_out line 1 permit icmp any any

513
Views
0
Helpful
1
Replies