Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

vpn users can not authenticate second time from ACS

Hi dears. i condigurated ipsec remote vpn at asa 5520. vpn user authenticate from ACS via radius protocol. when the i connect first time it can be connect then i  do disconnect and want to connect again  but i can not connect the second time.it is also the same as the other users.

i think i must be change someting at ACS but i do not know what ?

please help me.

this is my part of configuration of vpn.

aaa-server cosmoasa1 protocol radius
aaa-server cosmoasa1 (inside) host 192.168.193.xx
key cosmoasa1test
radius-common-pw cosmoasa1test
aaa authentication ssh console LOCAL

group-policy RAVPN attributes

dns-server value 192.168.193.10 192.168.193.11

vpn-idle-timeout 45

vpn-tunnel-protocol IPSec

split-tunnel-policy tunnelspecified

split-tunnel-network-list value Split_Tunnel

default-domain value azercosmos.local

tunnel-group vpnclient type remote-access

tunnel-group vpnclient general-attributes

address-pool VPNPOOL

authentication-server-group cosmoasa1

default-group-policy RAVPN

accounting-server-group cosmoasa1

223
Views
0
Helpful
0
Replies
CreatePlease to create content