Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

vpn using domain name

hi friends,

is it possible to create vpn in asa 5500 series using peer as FQDN name without ip address.

because it is possible in linksys rvo42

so i need help on this matter

advance thanks

cyril

3 REPLIES
Cisco Employee

Re: vpn using domain name

Yes, it is possible.

You need to configure the tunnel-group with the name of the peer, and make sure that is what the peer is sending down.

Also, use crypto isakmp address hostname - I would try with auto first, as that should automatically pick up on it being hostname.

New Member

Re: vpn using domain name

hi ,

thank you for ur reply

can u send me the any example link for that.

i want to try site to site vpn having both side dynamic ip.

instead of ip i want to use ddns name

is it possible ?

Cisco Employee

Re: vpn using domain name

I don't think there is an example link for that. You may have to go through trial and error and see what works eventually. Once you have the configuration, paste it here, and I'll see if it looks alright.

374
Views
0
Helpful
3
Replies
CreatePlease to create content