Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VPN work fine but can't access to switch

Hi i have troubles with ipsec vpn on my router. When i connect with vpn client to work network i can access to the internet. But i can't log on my work switch cisco sfe2010 via http if i put the ipaddress in to the browser. Ping work fine when i ping the ip of the switch. When i connect vi vpn client i have same ip from subnet as switch. Thanks for your help.

Sent from Cisco Technical Support iPhone App

6 REPLIES

VPN work fine but can't access to switch

Hi Jakub,

Looks like you are using the VPN pool IP range which is same in LAN. If thats the case you should use diffrent IP range for VPN Pool .

Thanks

Ajay

New Member

Re: VPN work fine but can't access to switch

Thanks for your reply. Yes a use same VPN pool for example 10.0.0.x/24 in ip address of switch and get 10.0.0.x/24 when i connect with VPN client. You think that will be work if I get for example ip address 10.0.1.x/24 when i connect with VPN client? Create VPN pool 10.0.0.1/24?

Sent from Cisco Technical Support iPhone App

VPN work fine but can't access to switch

Yes VPN pool range should be diffrent than being used in LAN. Changing that will solve your problem. Also just take care of NAT exempt.

Thanks

Ajay

New Member

Re: VPN work fine but can't access to switch

Ok but i will be in different network. It is not a problem when switch will be in 10.0.0.x/24 network and my ipaddress will be 10.0.1.x/24?

Sent from Cisco Technical Support iPhone App

VPN work fine but can't access to switch

Thats not a problem .

New Member

Re: VPN work fine but can't access to switch

ok thanks for your help I am novice in using cisco... I try your advice and reply

Sent from Cisco Technical Support iPhone App

386
Views
0
Helpful
6
Replies
CreatePlease to create content