I have configured one VPN concentrator for VRRP as role master,now i need to know, how to configure the backup, and how the configuration will replicate on backup, is everytime i need to update the modification of configuration on backup, right now backup is sharing address of master interfaces, both are pingable and accessible.
The Backup LAN-to-LAN feature lets you establish redundancy for your LAN-to-LAN connection. Unlike VRRP, which provides a failover for the VPN Concentrator, Backup LAN-to-LAN provides a failover for the connection itself. Although VRRP and Backup LAN-to-LAN are both ways of establishing continuity of service should a VPN Concentrator fail, Backup LAN-to-LAN provides certain advantages that VRRP does not.
"You can configure Backup LAN-to-LAN and load balancing on the same device, but you cannot configure VRRP and load balancing on the same VPN Concentrator.
"Redundant Backup LAN-to-LAN peers do not have to be located at the same site. VRRP backup peers cannot be geographically dispersed,
Thanks for the reply, this is good option, but my lower level design says that i have to configure only VRRP not other option. I have configured the VRRP as the following link says but not getting the result even getting more confuse. Please see the link this is exactly what i did the configuration
Now both are acting as master and only one is responding, how to replicate the configuration on unresponding concentrator. Unable to understand. When i reboot the responding concentrator for the time being unresponded came up and when the rebooted comes back the current one again unavailable for me.
I will highly appreciate if u tell me how to configure the concentrator for VRRP. If anyone has configured in real enviroment, Please guide me.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...