Want to allow website to "bypass the tunnel" but isn't working
We have a Cisco VPN 3000 concentrator that connects to a Cisco VPN 3002. The VPN is setup to "Tunnel Everthing" and has the "Allow the networks in list to bypass the tunnel". I have one website IP address set up in the "Split Tunneling Network List" that is selected. This is an external website. When I do a trace route it shows the route going through the VPN tunnel. I have rebooted the VPN 3002 but not the VPN 3000. I'm not sure if I need to reboot the 3000 but will try that later tonight. Any help would be appreciated.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...