We have a ASA 5510 that is setup to Nat a single web cam to a public IP. There is a acl created to allow www access to this IP on the outside interface. When I do a show xlate I see the private IP natting to the public IP however from the outside we cannot view the webcam. From the inside we can web into the private IP address. I've removed and readded the acl and the nat statement with no luck. I've cleared the xlate table. I'm wondering what else I could look at.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...