01-12-2009 06:57 AM
We have a ASA 5510 that is setup to Nat a single web cam to a public IP. There is a acl created to allow www access to this IP on the outside interface. When I do a show xlate I see the private IP natting to the public IP however from the outside we cannot view the webcam. From the inside we can web into the private IP address. I've removed and readded the acl and the nat statement with no luck. I've cleared the xlate table. I'm wondering what else I could look at.
01-12-2009 07:20 AM
Hi Jason,
I think it would be better ,if you could send or define you ACL configuration in clean way.It is hard to really know what could be the problem without this.
HTH
David
01-12-2009 07:27 AM
access-list aclout extended permit tcp any host {public ip} eq www
static (inside,outside){publicip}{insideip}netmask 255.255.255.255
access-group aclout in interface outside
01-12-2009 07:51 AM
Thanks
try this
access-group aclout in interface inside
HTH
DAK
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: