Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WEB ACLs is not working properly after upgrading ASA from 8.0.4 to 8.2.3

Hi all, i'm just upragde my ASA 5510 from 8.0.4 to 8.2.3 and find out that can't access

bookmarked resources trough clientless webvpn. When i click on link it's show me window that access is denied, and i see denied string in syslog that access to resource was denied http://10.16.9.17....

but i have WEB ACL

access-list DVI webtype permit url http://10.16.9.17/* log default

which is permit access to http://10.16.9.17/* and it's working well before

now i'm add to web acl string

access-list DVI webtype permit tcp host 10.16.9.17 log disable

and only after that access was restored, why?

thank you.

1 REPLY
Cisco Employee

Re: WEB ACLs is not working properly after upgrading ASA from 8.

It should work just fine. I would suggest that you configure a new webtype ACL with a new name with the URL that you have configured earlier and assign this new webtype ACL to the VPN group. Let us know if that works. If it still doesn't, then you might want to open a TAC case to get it investigated further.

220
Views
0
Helpful
1
Replies