Then you can connect to your OWA server and in the Fiddler capture it will give you the POST paramters. ***Keep in mind, if you use HTTPS for OWA, go to Fiddler, Tools, Fiddler Options, Check the box labeled "Capture HTTPS CONNECTs and also "Decrypt HTTPS traffic".
You then take that information to the bookmark you have created in the ASA and then put the information in exactly as it shows from capture to the POST parameters.
So for username/password if you are using the same credentials as your webvpn login, your post would have CSCO_WEBVPN_USERNAME and password would be CSCO_WEBVPN_PASSWORD for example.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...