WebVPN setup on ASA 5520

[dpatkins]

I am stuck. I am trying to configure WebVPN on a ASA 5520 7.22. I would like for the client to https://myaddress and then utilize our Radius server to authenticate. I have the radius server setup and test, but I cannot seem to get the WebVPN to work. I have so many questions about this, I do not know where to start.

I would also like to know exactly what I will be able to do. I would like to be able to connect to email using my outlook clinet to an outlook server. I would like to be able to connect to networked shares or even remote desktop in.

Any help would be appreciated.

Dwane

[Jagdeep Gambhir]

Hi Dwane,

Check out these links,

PIX/ASA 7.x Authentication and Authorization Server Groups for VPN Users via ASDM Configuration Example

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008060f261.shtml

PIX/ASA: Allow Remote Desktop Protocol Connection through the Security Appliance Configuration Example

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807d287e.shtml

PIX Firewall 7.x with Mail Server Access on Inside Network Configuration Example

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008067cf3b.shtml

ASA with WebVPN

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9ff.shtml

Please rate if that helps !

Regards,

~JG