Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WebVPN will not send radius accounting

Hi Folks,

I have setup a webvpn system, which works perfectly on a 2811. However, when I enable aaa accounting on the context, it seems to be enabled BUT the accounting packet is never sent.

Debug shows this

Aug 28 09:55:56 c2811-test 312: Aug 28 07:55:56.652: WV-AAA: Nas Port ID set to 31.54.80.206.

Aug 28 09:55:56 c2811-test 313: Aug 28 07:55:56.652: AAA/ACCT/HC(00000011): Register SSLVPN/4BFEEA58 64 bit counter support not configured

Aug 28 09:55:56 c2811-test 314: Aug 28 07:55:56.652: AAA/ACCT/HC(00000011): Update SSLVPN/4BFEEA58

Aug 28 09:55:56 c2811-test 315: Aug 28 07:55:56.652: AAA/ACCT/HC(00000011): no HC SSLVPN/4BFEEA58

Aug 28 09:55:56 c2811-test 316: Aug 28 07:55:56.656: AAA/ACCT/EVENT/(00000011): CALL START

Aug 28 09:55:56 c2811-test 317: Aug 28 07:55:56.656: Getting session id for NET(00000011) : db=4F5A7618

Aug 28 09:55:56 c2811-test 318: Aug 28 07:55:56.656: AAA/ACCT(00000000): add node, session 7

Aug 28 09:55:56 c2811-test 319: Aug 28 07:55:56.656: AAA/ACCT/NET(00000011): add, count 1

Aug 28 09:55:56 c2811-test 320: Aug 28 07:55:56.656: WV-AAA: AAA authentication request sent for user: "username"

Aug 28 09:55:56 c2811-test 321: Aug 28 07:55:56.668: WV-AAA: AAA Authentication Passed!

Aug 28 09:55:56 c2811-test 322: Aug 28 07:55:56.668: WV-AAA: User "username" has logged in from "31.54.80.206" to gateway "BBSVPN"

Aug 28 09:55:56 c2811-test 323:              context "BABILON"

Aug 28 09:55:56 c2811-test 324: Aug 28 07:55:56.668: Getting session id for NET(00000011) : db=4F5A7618

Aug 28 09:55:56 c2811-test 325: Aug 28 07:55:56.668: WV-AAA: Calling START accounting

Aug 28 09:55:56 c2811-test 326: Aug 28 07:55:56.668: AAA/ACCT/NET(00000011): Pick method list 'bablist'

Aug 28 09:55:56 c2811-test 327: Aug 28 07:55:56.668: AAA/ACCT/SETMLIST(00000011): Handle DE000002, mlist 4AA1D1A8, Name bablist

Aug 28 09:55:56 c2811-test 328: Aug 28 07:55:56.668: WV-AAA: Adding group name pol1

Aug 28 09:55:56 c2811-test 329: Aug 28 07:55:56.668: AAA/ACCT/EVENT/(00000011): NET UP

Aug 28 09:55:56 c2811-test 330: Aug 28 07:55:56.668: AAA/ACCT/HC(00000011): Update SSLVPN/4BFEEA58

Aug 28 09:55:57 c2811-test 331: Aug 28 07:55:56.672: AAA/ACCT/HC(00000011): no HC SSLVPN/4BFEEA58

Aug 28 09:56:00 c2811-test 332: Aug 28 07:55:59.100: AAA/ACCT/NET(00000011): Pick method list 'bablist'

Aug 28 09:56:00 c2811-test 333: Aug 28 07:55:59.100: AAA/ACCT/SETMLIST(00000011): Handle DE000002, mlist 4AA1D1A8, Name bablist

Aug 28 09:56:00 c2811-test 334: Aug 28 07:55:59.104: WV-AAA: Sending TUNL IP (10.192.69.53) addr update

Aug 28 09:56:00 c2811-test 335: Aug 28 07:55:59.104: AAA/ACCT/EVENT/(00000011): ATTR ADD

Aug 28 09:56:00 c2811-test 336: Aug 28 07:55:59.104: AAA/ACCT(00000011): Accounting response status = FAILURE

Aug 28 09:56:00 c2811-test 337: Aug 28 07:55:59.104: AAA/ACCT(00000011): Send NEWINFO accounting notification to EM successfully

Aug 28 10:00:00 c2811-test 340: Aug 28 08:00:00.162: WV-AAA: Calling STOP accounting

Aug 28 10:00:00 c2811-test 341: Aug 28 08:00:00.162: AAA/ACCT/NET(00000011): Pick method list 'bablist'

Aug 28 10:00:00 c2811-test 342: Aug 28 08:00:00.162: AAA/ACCT/SETMLIST(00000011): Handle DE000002, mlist 4AA1D1A8, Name bablist

Aug 28 10:00:00 c2811-test 343: Aug 28 08:00:00.162: AAA/ACCT/EVENT/(00000011): NET DOWN

Aug 28 10:00:00 c2811-test 344: Aug 28 08:00:00.162: AAA/ACCT/HC(00000011): Update SSLVPN/4BFEEA58

Aug 28 10:00:00 c2811-test 345: Aug 28 08:00:00.162: AAA/ACCT/HC(00000011): no HC SSLVPN/4BFEEA58

Aug 28 10:00:00 c2811-test 346: Aug 28 08:00:00.162: AAA/ACCT/NET(00000011): Accounting record not sent

Aug 28 10:00:00 c2811-test 347: Aug 28 08:00:00.162: AAA/ACCT(00000011): del node, session 7

Aug 28 10:00:00 c2811-test 348: Aug 28 08:00:00.162: AAA/ACCT/NET(00000011): free_rec, count 0

Aug 28 10:00:00 c2811-test 349: Aug 28 08:00:00.162: /AAA/ACCTNET(00000011) reccnt 0, csr FALSE, osr 0

Aug 28 10:00:01 c2811-test 350: Aug 28 08:00:00.162: AAA/ACCT/HC(00000011): Update SSLVPN/4BFEEA58

Aug 28 10:00:01 c2811-test 351: Aug 28 08:00:00.162: AAA/ACCT/HC(00000011): no HC SSLVPN/4BFEEA58

Aug 28 10:00:01 c2811-test 352: Aug 28 08:00:00.162: AAA/ACCT/EVENT/(00000011): CALL STOP

Aug 28 10:00:01 c2811-test 353: Aug 28 08:00:00.162: AAA/ACCT(00000011) reccnt 0, osr 0

c2811-test#sh webvpn context BABILON

Admin Status: up

Operation Status: up

Error and Event Logging: Disabled

CSD Status: Disabled

Certificate authentication type: All attributes (like CRL) are verified

AAA Authentication List: WEBVPN

AAA Authorization List not configured

AAA Accounting List: bablist

AAA Authentication Domain not configured

Authentication mode: AAA authentication

Default Group Policy: pol1

Associated WebVPN Gateway: BBSVPN

Domain Name: babilon

Maximum Users Allowed: 1000 (default)

NAT Address not configured

VRF Name not configured

Virtual Template: 1

Virtual Access  : 3

aaa accounting network bablist start-stop group babaaa

aaa group server radius babaaa

server 10.192.68.2

ip radius source-interface Tunnel1

deadtime 0

load-balance method least-outstanding

What have a done wrong?

Cheers
Alan

6 REPLIES
Cisco Employee

WebVPN will not send radius accounting

Alan,

"debug radius" will tell you in a bit more details what's happening.

All we seem to be seeing is failure response from server (but I might be off it's something I have not been dealing with for a while).

Check also logs on RADIUS server.

M.

New Member

WebVPN will not send radius accounting

Thanks for your reply Marcin,

I have added that debug too and checked the server, i have even added ip packet debug too.

I simply dont see the packet sent from the box, at all!

I dont understand why when the debug shows the accounting packet still being built at

Aug 28 07:55:59.104

Why does it report the accounting response failure in the same timestamp?

Bizarre!

Cisco Employee

Re: WebVPN will not send radius accounting

Alan,

Was there supposed to be a trace of some sort attached?

M.

edit: Scratch that, I see what you mean now. Could be a problem with source of updates... could be, I think RADIUS debugs will help get a clearer picture.

New Member

Re: WebVPN will not send radius accounting

I have enabled auth processing and this now gets through to my radius server and i can login via the radius server, but still, no accounting

During the auth phase, i see it finds the correct  server and builds the packet, with the acct phase, it only manages to find the list but never mentions the server

Just for info the ios is 15.1-4 M6

New Member

Re: WebVPN will not send radius accounting

It must be a bug.

removed the accounting start delay cfg that i had and it now sends the acct start, but with no IP address, with interim updates configured, i get the first update with the IP, however, every subsequent interim update, a new Framed-IP AVP is added, so after a while the interim acct packet has many Framed-IP AVP's

Hey Mr Cisco, can you fix this please?

Cisco Employee

Re: WebVPN will not send radius accounting

Alan,

Open up a TAC case, if it's a bug the folks there will do what can be done ;-)

Attach debug radius and config when opening it. Give also 624912795 - another example when customer saw similar behavior.

M.

584
Views
0
Helpful
6
Replies