I have Cisco ASA 8.2(5) and Mikrotik behind a DSL that I cannot get a static public IP fot it, I would to create a VPN connection between the Cisco Firewall that has static public IP and the mikrotik, I just confused about how to do that, I think S2S tunnel its not going to work as I don't have two static IPs in both side, so I thought if the Mikrotik can work as a Cisco VPN client. is that work and how we configure them.
I already read that, but still cannot do it, I can pass phase one but never phase two, I didn't configure the ASA with tunnle as I don't want to use the DSL IP address, so I create the configuration for remote vpn as cisco vpn and windows vpn, but I don't know how to configure the mikrotik to make it as a L2tip/ipsec VPN client
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...