Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

what is the best solution for RA VPN backup on asa?

hi All,

i'm trying to choose between landing ra-vpn on active\stanby asa5510 pair and vpn load-balance feature.

if i'll choose failover pair then i'll have a problem with dynamic routing.

if i'll choose load-balance feature then i should solve problem with assymetric routing for outgoing traffic from the clients in local net. or may be i;m wrong?

please advise me.

Everyone's tags (5)
1 REPLY
New Member

Re: what is the best solution for RA VPN backup on asa?

Hi, both solutions would not cause problems

if i'll 
choose failover pair then i'll have a problem with dynamic routing. 

If you're going Active / Passive you can have dynamic Routing - if you go Active / Active you can´t have VPN anyway so this is no solution

if i'll 
choose failover pair then i'll have a problem with dynamic routing. 

Afaik (sorry it´s been a while with load balancing) the client stays connected to the ASA that it connects first (persistent) and you can automaticaly redistribute a /32 route into your routing Process.

If you don´t like this option you can create different pools on your VPN ASAs and do some statice routing.

Hope I did not mix up to many facts - HTH you

cheers Michael

267
Views
0
Helpful
1
Replies