Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

winxp dial up vpn client for external vpn server behind ASA5510

I am using winxp dial up vpn client for my external vpn server behind ASA5510 firewall but I am not able to connect.While as using the same procedure without firewall it works.Kindly help me out.

1 REPLY

Re: winxp dial up vpn client for external vpn server behind ASA5

If you are refering to the MS PPTP client you need to allow it through PIX/ASA outbound.

go over this link

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094a5a.shtml

Complete these steps to add commands for versions 7.x and 8.0 using the inspect command:

Add PPTP inspection to the default policy-map using the default class-map.

pixfirewall(config)#policy-map global_policy

pixfirewall(config-pmap)#class inspection_default

pixfirewall(config-pmap-c)#inspect pptp

Rgds

Jorge

138
Views
0
Helpful
1
Replies
CreatePlease to create content