Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

02 DS3 Module in 3845

Hi,

I have one 3845 with DS3 connection and it works OK. I tried to insert the second DS3 module in it, and the router did not recognized the module. I will use the second module just to link test .

Any idea about the solution ?

TIA Amaral .

7 REPLIES
Blue

Re: 02 DS3 Module in 3845

Did you try rebooting the router after the hardware installation?

New Member

Re: 02 DS3 Module in 3845

Yes, the router was turned off when I inserted the DS3 Module . TKS

Hall of Fame Super Gold

Re: 02 DS3 Module in 3845

If possible, turn off router, reseat module, turn on. If still trouble send output of "show diag".

Hall of Fame Super Gold

Re: 02 DS3 Module in 3845

Amaral

Depending on the type of card you may need this command before the router seems to recognize your card:

card type t3

HTH

Rick

New Member

Re: 02 DS3 Module in 3845

Hi, the router was turnned off, the type interface was configurated, but it doesnt work . Tks for the help

Hall of Fame Super Gold

Re: 02 DS3 Module in 3845

As mentioned above, when in trouble with router hardware, check "show diag".

Cisco Employee

Re: 02 DS3 Module in 3845

Hi,

Can you swap the working module with the new one and see if it works fine in the known good slot. Next, try the working module in the other slot. If its a HW fault this way we can narrow down if its a faulty slot or card.

In case the above excercise doesn't help, please do post the exact module part number and the IOS version in use.

HTH,

~Vaibhav

259
Views
0
Helpful
7
Replies
CreatePlease to create content