cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
508
Views
0
Helpful
1
Replies

$100 Reward - MGX 8950 Help

aczwicker
Level 1
Level 1

Ive been trying to figure out what is wrong with this MGX8950 for a while now, it keeps repeating the following....(i attached a longer file)

Also, Ive tried 4 different PXM-HD backcards and 3 different PXM 45/C.

I even went as far as dismounting all of the linecards and using 2 different UI-S3 cards.

Any suggestions?

This item was shipped to us via freight on a pallett and all we know is that it came out of service from somewhere that was using it.

I do not know much about these, i have a basic knowledge of the cisco interface.

I Need to be able to test the cards and get a basic configuration. I work for a company that resells this equipment. I will pay anyone $100 that can show me how to configure these either through a semi-detailed email (aczwicker@comcast.net or by calling me @ 503-779-7999

##############################################################################################################

start type 0xc22a0015

Mem size 0x20000000

Clear Edac...                                                                                                                                               done.

Verify Checksum... Valid

Loading from 0xbfc19398

Starting at addr/reset type a0010000 c22a0015

start addr & end  . . . . . . . . . . . . : 80014fd0 800fa348

start addr & offset . . . . . . . . . . . : bfc04fd0 00019398

Inflating Image to & from . . . . . . . . : a0200000 bfc1e368

Image start & length  . . . . . . . . . . : bfc1e368 000e5378

core_entry addr & inflate time in msec  . : a0200000 00002926

usrInit addr & memory size  . . . . . . . : 802022d4 20000000

BRAM on Mother Board

Probing FP co-processor... Found

Setup SIO device...

                   ÿ

Reinitializing DRAM...completed

rst type & STATUS: c22a0015 34007380

C0_EPC  & CAUSE  : 002151b0 00000c00

C0_CNFG & ErrPC  : 8000c08b bfc00940

RA_reg  & SPR_reg: bfc00914 80000400

reset reason     : 00000000

bootstrap        : 005.002.000.200 20050913-010719

romBoardCacheReset Entry

romBoardCacheReset Exit

start type 0xc22a0015

Mem size 0x20000000

Clear Edac...                                                                                                                                               done.

Verify Checksum... Valid

Loading from 0xbfc19398

Starting at addr/reset type a0010000 c22a0015

start addr & end  . . . . . . . . . . . . : 80014fd0 800fa348

start addr & offset . . . . . . . . . . . : bfc04fd0 00019398

Inflating Image to & from . . . . . . . . : a0200000 bfc1e368

Image start & length  . . . . . . . . . . : bfc1e368 000e5378

core_entry addr & inflate time in msec  . : a0200000 00002926

usrInit addr & memory size  . . . . . . . : 802022d4 20000000

BRAM on Mother Board

Probing FP co-processor... Found

Setup SIO device...

                   ÿ

Reinitializing DRAM...completed

rst type & STATUS: c22a0015 34007380

C0_EPC  & CAUSE  : 002151b0 00000c00

C0_CNFG & ErrPC  : 8000c08b bfc00940

RA_reg  & SPR_reg: bfc00914 80000400

reset reason     : 00000000

bootstrap        : 005.002.000.200 20050913-010719

romBoardCacheReset Entry

romBoardCacheReset Exit

##############################################################################################################

(REPEATS FOREVER)

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

The device you got is (was) meant for large telecoms and require extensive training to be configured and operated.

Not many people know how do that and even less may be available to share occasionally their knowledge for a nominal fee.

Good luck.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card