Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

12406 IOS Monitoring Backplane

Each slot on the 12406 is limited to 10G to the backplane per slot. Do you know any commands or SNMP OID values we can monitor to make sure we don't hit the per slot limitation.

3 REPLIES
Hall of Fame Super Silver

Re: 12406 IOS Monitoring Backplane

Hello Mdwheadon,

the following can be helpful specially the drop option

show controllers psar [drop | fromfab | output | queue | register | tofab]

see

http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/prp.html#wp1038705

Hope to help

Giuseppe

New Member

Re: 12406 IOS Monitoring Backplane

Thank you for the information however I am looking for a way to monitor the utilisation to the backplane to be proactive before backplane congestion occurs.

Do you know of any OID values or any other commands. The command you have provided appears to show us information when backplane congestion occurs ?

Hall of Fame Super Silver
432
Views
5
Helpful
3
Replies