1700 ADSL wic card

[xs2sachin]

I want to configure two different adsl lines from two different operators for

Is there any ADSL WIC card with two ADSLoPOTS port or i need to have two different cards for each line.

In both the cases please suggest me the PART no required for cisco 1700

[spremkumar]

hi sachin

AFAIK you need to have WIC-1ADSL card installed to support ADSL0oPOTS.

I feel you need to have 2 such WICs to connect to 2 different SP.

http://www.cisco.com/en/US/products/ps5853/products_data_sheet0900aecd8028aa5a.html

Do mention the router model being used over there for this purpose..

regds

[xs2sachin]

model not yet decided i want to use some low end router. can you suggest me some models matching my requirements --

--two adsl wan connections

-- one lan connection

-- static routing

I want to use these two adsl wan connections in redundancy or load balancing what configuration is required

[spremkumar · Accepted solution]

Hi Sachin

You can make use of Cisco 1841 Series router which comes with 2 WIC slots which you can make use for installing the ADSL cards and 2 ethernet ports for your local lan..

http://www.cisco.com/en/US/products/ps5875/index.html

I feel its the best bet available out there when compared to Cisco 1700 series routers since the later may be phased out by any time..

regds