Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

1811 RT DHCP server not working

Hi all,

I am having some difficulty trying to get this 1811 router to give any ip addresses to host that connect to the switch ports of the router. I have tried everything and maybe I'm going crazy. The config is simple and still can not make it work no matter which switch port I used, maybe I am missing something. Thank you very much for your help.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 1811 RT DHCP server not working

Your ip address needs to be put on your vlan in order for dhcp to work. You have your address in fa1 which means that anything that connects to that one port will get an address, but no other ports will work. If you put it on your vlan, and all of your members are part of vlan1, it should work fine.

HTH,

John

HTH, John *** Please rate all useful posts ***
2 REPLIES

Re: 1811 RT DHCP server not working

Your ip address needs to be put on your vlan in order for dhcp to work. You have your address in fa1 which means that anything that connects to that one port will get an address, but no other ports will work. If you put it on your vlan, and all of your members are part of vlan1, it should work fine.

HTH,

John

HTH, John *** Please rate all useful posts ***

Re: 1811 RT DHCP server not working

Try this:

int fas1

no ip address

int vlan1

ip address 10.10.1.1 255.255.255.0

Then, plug your PC into one of the switchports 4-9.

Hope this helps.

Brandon

439
Views
0
Helpful
2
Replies
CreatePlease to create content