I have a multi-tenant building that has 30 customers and I am going to provide internet access to them using a primary link (30meg) and a secondary T-1 for failover. I want to give everyone a public static IP address that is on my primary gateway subnet (66.x.x.x). The WAN port will be configured with a public static ip (T-1 ISP has not given me the addresses yet) In case of failover will the 1841 route the public static IPs to the wan port and out the gateway? I know I probably need to give more info.
Offers flexibility to connect to various types of DSL broadband or cable access or Ethernet access. Additional capability to deploy redundant WAN connections for failover protections and load balancing.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...