Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

1841 HWIC Card

Hi,

Wanted to know how much HWIC card we can have in 1841 modular router.

Presently we are using 2 FE and 4 Serial interfaces.

I don't have the physical access of the router but do have sh tech with me.

I assume all slots are occupied and nothing can be added to this.

Expert opinion on this.

Please find attached the Sh tech.

Reg,

Sushil

1 REPLY
Bronze

Re: 1841 HWIC Card

Hello,

The 1841 has two WIC slots as well as two built-in Fe ports. Looking at the "Show inventory" out of the show tech you provided, it shows that there is a serial card in both of the available expansion slots. It looks like the router is filled-up.

------------------ show inventory ------------------

NAME: "1841 chassis", DESCR: "1841 chassis, Hw Serial#: 336740761, Hw Revision: 7.0"
PID: CISCO1841         , VID: V05 , SN: FHK112516M7

NAME: "C1841 Motherboard with 2 Fast Ethernet", DESCR: "C1841 Motherboard with 2 Fast Ethernet"
PID: CISCO1841         , VID: 7.0, SN: FHK112516M7

NAME: "WIC/HWIC 0", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T=           , VID: 1.0, SN: 24046985 

NAME: "WIC/HWIC 1", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T=           , VID: 1.0, SN: 32986640

472
Views
0
Helpful
1
Replies
CreatePlease to create content