Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1841 or 2821 or other Cisco modell hwic-3g-gsm+HWIC-AP-AG-E or HWIC-AP-G-E

Hi all.

I want to build a portable accesspoint that uses hwic-3g-gsm and a HWIC AP card AG or G.

Or a model with build-in Wlan+3G.

But i cannot find information what models that supports 2 HWIC card at the same time.

Do i need a 3825 or can i use 1841 or 2821?

2 REPLIES
Hall of Fame Super Silver

Re: 1841 or 2821 or other Cisco modell hwic-3g-gsm+HWIC-AP-AG-E

Hello Bjorn,

a 1841 is enough:

Both slots on the Cisco 1841 router are HWIC slots and provide compatibility with WICs and multiflex trunk (VWICs) interface cards

(for data only).

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/product_data_sheet0900aecd8016a59b.html

Hope to help

Giuseppe

New Member

Re: 1841 or 2821 or other Cisco modell hwic-3g-gsm+HWIC-AP-AG-E

Thank you for answer.

You can not use 2 Cisco HWIC-AP card at the same time.

But it may be possible to use 3G+AP card at the same time.

This limitation could be that you can not use 2 HWIC at the same time or just a limit so that you do not use 2 HWIC-AP at the same time.

Bjorn Sundin.

137
Views
0
Helpful
2
Replies